Mini Truck Body Drop - Traditional Body-Drop 101
28. and 29. Next, it was time to roll that pinch weld. We removed the heavy wall tube from under the truck. The first 2 inches of the pinch weld was attached to the stock body-mount brace, and was about 1/4-inch thick. It would be very hard to bend this, so we cut that section off. We started with a gradual bend using a set of channel locks, making two full passes along the whole pinch. Once it was at a 45-degree angle, it was time to bust out that BFH again. Sharing this job with some friends over a few beers wouldn't be a bad idea. View Related Article