Related Photo Galleries
23.With the suspension work completed, it was time to find a set of wheels that would fit our six-lug truck and tuck in cleanly. Boyd Coddington Wheels sent us this un-welded wheel to test-fit on the truck. This wheel helped us determine that to make a 20x8-inch pair of wheels tuck into the rear, we'd need 6 inches of backspacing and we'd have to trim the inside edge of the bed sides. Up front we'd need a pair of 18x8-inch wheels with 5.5 inches of backspacing to tuck inside of the 4WD front sheetmetal.