The G1016 Smooth Surface Clay Kit from Meguiar's gets the job done. Removing surface contaminants and restoring a smooth surface to your paint finish is easily accomplished with this Meguiar's Smooth Surface Clay Kit. The non-abrasive clay bar safely, easily, and instantly removes paint overspray, fallout, environmental contaminants and more, making waxing easier and more durable. The Smooth Surface Clay Kit provides the best performance and the best value with a bonus Cleaner Wax sample and a fullsize Supreme Shine Microfiber cleaner in every kit. For more information on this and other cleaning products, check out www.meguiars.com.
Introducing the new VFD3-1009 vacuum fluorescent instrument package from Dakota Digital. This six-gauge system features a 255-mph speedometer, 0-9,990-rpm tachometer, oil pressure, water temperature, fuel level, and voltage gauge. The system also features odometer/trip odometer, turn signals, high beam, check engine, brake, and cruise control indicators. There are also several additional functions such as a 0-60 timer, 1/4-mile timer, 1/4-mile speed recall, high-speed recall, high-rpm recall, and hour meter, as well as a service meter. Complete with a chromed, machined aluminum dash housing measuring 10-1/8 inches by 5 inches, it is available in your choice of a blue, green, or high-contrast teal display. For more information on the best dash gauge solutions, go to www.dakotadigital.com.
Is Your Rod Strong Enough?
Arias is pleased to announce their new line of Arias3 High-Performance Connecting Rods and related components. With more than 30 years of experience with reciprocating assemblies, Arias can now offer these quality precision internals with extreme value. Forged from aerospace-quality 4340 chromoly steel, Arias3 H-Beam rods feature fully machined, X-rayed, and ultrasonic-tested surfaces throughout. These surfaces are then deburred, shot-peened, and stress-relieved. ARP high-tensile bolts are included for precise torque, along with silicon-bronze pin end bushings for full-float capabilities. Applications include small- and big-block Chevy, SD Ford, Acura/Honda, Mitsubishi, Nissan, Subaru, Toyota, and VW. For more information regarding these and other products, visit www.gr8hotrods.com.
The Big Dawg
Rockford Fosgate's HT technology debuts with what could possibly be the future of mobile amplifier technology and performance as we know it. Being introduced at the 2006 Consumer Electronics show is the T15kW 15,000-watt amplifier. So, what is this HT Technology? Hybrid Technology (HT) advantages include unmatched dynamic power capabilities and the ability to drive low-impedance loads and reduce the strain on a vehicle's electrical system. Unsurpassed sound quality and performance are gained by the use of state-of-the-art components and materials. Typical amplifiers draw 150 amps of current per 1,000 watts produced. HT Technology draws around 30 amps per 1,000 watts produced. Imagine a time when a 200-watt amplifier draws only 6 amps of current. The HT technology will someday be handed down to Rockford Fosgate mobile amplifiers in the future. A normal amplifier of this size would draw over 2,100 amps of current. If not for the patent-pending power supply, this amplifier would not be possible. For more information on this and other future products, check out www.rockfordfosgate.com.