One of the most asked questions we get here is, "How do I get more power from my four-cylinder S-10?" We decided to compile a list of power parts for the anemic four-bangers instead of telling you to swap in a small-block, which is our most common response. Most of these parts can be installed with some simple handtools and a little common sense. All of these parts will in one way or another give more performance by either creating more ponies or helping you get it to the ground faster. Maybe you shouldn't look at a four-cylinder as a bad thing but as a blessing in disguise. With gas prices sky-rocketing right now, these small motors just take less go-go juice to run, even when you install some of these power mods. The money you save at the pump could be used to buy new wheels or help get you closer to that body drop. Look, we know you might not be able to blow by your buddy on the track, but you can honk and wave as you pass him at the pump.
The 2.2L PowerAid 1-inch Throttle Body Spacer features PowerAid's unique, patented helix-bore design, which creates a spinning action of the incoming air charge as it passes through the throttle-body spacer. This air charge contributes to better atomization of the air/fuel mixture at the combustion chamber. The end result is more part-throttle torque, improved midrange power, and overall combustion efficiency for more mpg. The new PowerAid is an easy bolt-on installation and comes complete with all mounting hardware and easy-to-follow instructions. For more information, contact: Airaid, (800) 498-6951, www.airaid.com.
For improved performance, check out ACCEL's 300+ Thundersport Ferro-Spiral Wire Sets. Each high-gloss 8mm double-silicone wire is rated at more than 550 degrees F and features a precision-molded spark plug boot to fit the S-10. With a heavy-gauge spiral-wound alloy conductor, resistance is only 150 ohms per foot, providing maximum voltage potential at the spark plug. They are available in blue, red, or yellow wire colors. For more information, contact: ACCEL, (216) 688-8300, www.accel-ignition.com.
ACCEL DIS Coil
The DIS Coil features a "raised dome" construction and silicone magnetic steel core, along with optimized windings and resistance to produce higher energy spark for a more efficient fuel burn. It is compatible with OE computer-controlled ignition systems as well as aftermarket capacitive discharge systems. For more information, contact: ACCEL, (216) 688-8300, www.accel-ignition.com.
Centerforce has developed multiple clutch systems for the four-cylinder S-10. Depending on the vehicle model year, Centerforce offers three styles of clutches. Centerforce I is designed for a mild upgrade over stock. Centerforce II is intended for mildly upgraded trucks for towing and more spirited driving. Dual Friction clutch sets are geared for heavier towing, most off-road four-wheeling, and weekend racing with extreme power upgrades. For more information, contact: Centerforce, (928) 771-8422, www.centerforce.com.
Bosch Replacement Fuel Pump
Robert Bosch Corporation has launched a comprehensive premium fuel pump program that uses advanced turbine technology to feed your four-cylinder. They conform to OE dimensions and appearance, ensuring safe, easy installations. For more information, contact: Bosch, (888) 715-3616, www.boschusa.com.
DynoMax offers a variety of exclusive muffler designs engineered to provide exceptional flow and appealing sound on a full range of popular performance applications. The brand's leading muffler designs are the DynoMax Ultra Flo muffler, featuring straight-through single-tube routing and continuous-roving fiberglass, and the DynoMax Super Turbo muffler, which contains patented flow directors to channel exhaust flow for enhanced power. For more information, contact: DynoMax Performance Exhaust, (734) 243-8000, www.dynomax.com.
B&M's Sport Shifter
B&M Racing & Performance's popular line of Precision Sport Shifters are now available for the Chevrolet S-10 pickup, providing street and off-road enthusiasts with pinpoint-accurate shifts. CAD-designed for ultra-precise shifts, B&M's S-10 Precision Sport Shifters substantially shorten the shifter throw by 36 percent. The shifters are bolt-in replacements that require only simple handtools for quick installation. For more information, contact: B&M, (818) 882-6422, www.bmracing.com.
Aluminum flywheels for the '94-'03 2.2L Chevrolet S-10 are made from machined 6061 T6 aluminum and feature a 1050 steel friction surface with CNC-machined fastener holes and chamfers. The flywheels can be paired with just about any clutch disc material available, from organic to Kevlar and even sintered iron. For more information, contact: Fidanza Engineering Corporation, (440) 259-5656, www.fidanza.com.
The Hays line of clutch kits is specifically designed for severe usage; every unit is built to withstand extreme conditions and overuse. These kits are made in the USA and feature all-new parts - no used parts here. The clutches can significantly extend the service life when used in off-roading, towing, and performance trucks. For more information, contact: Hays, (216) 688-8300, www.haysclutches.com.
Professional Products Filter
This Professional Products Hi-Tech Fuel Filter measures 3 inches long, 2 inches in diameter and flows as much as 160 gallons per hour, filters down to 10 microns, and handles as much as 60 psi. The lightweight-aluminum Hi-Tech Fuel Filter has a replaceable filter element and resists corrosion inside and out. The filter is available in either fully polished or with a blue-and-red anodized housing. For more information, contact: Professional Products, (323) 779-2020, www.pro fessional-products.com.