This simple mod can really make your truck scream. The cost of supplies, plus a little skill, can really bring your truck to life. The keys to a good metal-flake paintjob are to make sure you prep the roof properly, mix the paint right, then buff, and cut the roof to a smooth finish. For this quick project, we didn't finish it off with a buff and another clearcoat, due to our Forbidden Fantasy show deadline. For more information, contact the companies listed in the sources box.
 The rule of thumb is to tape...  The rule of thumb is to tape off everything that you don't want to sparkle. And we mean everything! |  Use a razorblade to make sharp...  Use a razorblade to make sharp lines and curves, this will help to create a smoother flowing separation. |  Next, we prepped the surface...  Next, we prepped the surface by giving it a quick D.A. treatment. Then, we thoroughly cleaned the area for paint. |
 Our red basecoat was laid...  Our red basecoat was laid down nice and even. We let it dry and gave it two full coats. |  We mixed the House of Kolor...  We mixed the House of Kolor Rainbow Metallic Flake into the clear to provide a good adhesive. In a final paintjob, you should buff, cut, then reclear. |  It was time to shine. The...  It was time to shine. The flake coat was sprayed lightly and evenly to ensure proper coverage. |
 Here's a close look at the...  Here's a close look at the glitz and glamour of flake. It definitely adds a whole new personality to a truck. |  Here, we're outside the shop...  Here, we're outside the shop and almost ready to hit the show. Special thanks goes out to Tom McWeeny and Marcel Venable for all their hard work. | |