Welcome to yet another primered appearance of the Construction Zone. We hope that by seeing more unfinished rides in the raw you?ll come up with some new ideas of your own to complete the ride that?s collecting cobwebs in your garage. If you have a ride that?s not quite done but makes you want to shave, suicide, or chop something every month, then snap some of your own. Send them to us here at Mini Truckin? c/o Construction Zone, 2400 E. Katella Ave., 7th Floor, Anaheim, CA 92806.
OWNER'S NAME: Trevor Sutherland...
OWNER'S NAME: Trevor Sutherland
YEAR & MAKE: '89 Mazda B2200
LOCATION: Bothell, WA
CLUB: Sittin' Pretti
Wheels/tires: 18-inch Rozzi Peels on 225/35ZR18 Wanli
Suspension/chassis: Toyota rearend for five-lug conversion, four-link, step notch, 12-gallon air tanks, two Viair 450's, Extreme 250 valves
Body mods: Shaved door handles, locks, emblems, antenna, gas door, cowl, body seams, tailgate handle, molded roll pan, frenched license plate (front and rear), body-dropped 2-1/2 inches, molded notch cover using Mazda bed floor, rear tubs lengthened, billet grille, billet mirrors, and clear lights
Interior/stereo: Billet Specialties steering wheel, custom door panels covered in tweed, billet armrest and window cranks, chrome door handles out of a phantom Mazda and Integra bucket seats
Future plans: Some form of paint, finish interior, and some kind of random hole in the roof
Special thanks: Girlfriend Jen, Mother Goose Customs, Drop Shop, Sittin' Pretti, and all the mad peeps that have tossed in their two cents
Completion date: Summer '07
OWNER'S NAME: Lukasz Granicy...
OWNER'S NAME: Lukasz Granicy
YEAR & MAKE: '76 Chevrolet Luv
LOCATION: Lancaster, CA
Wheels/tires: 18-inch '02 Lexus SC430's on 215/35/ZR18 rubber
Suspension/chassis: '89 Toyota pickup frame, engine, and floor pan; 7-1/2-inch body drop (partial frame, partial body); back-halved frame; '85 Chevy Sprint booster and master cylinder; '87 Toyota clutch; Z'd and narrowed front clip; BYC custom control arms; custom steering cross-drag link; custom engine mounts; triangulated cantilever four-link with 35 inches of lift; 2,600 lb bags in back & 2,500 lb in front; 5-gallon air tank; two AZ compressors; and a narrowed Ford 9-inch rearend
Body mods: Rockers cut and plated with 1/4-inch plate, shaved handles, 2-1/2-inch cowl hood
Interior: Really cool custom shifter
Future plans: Paint and pinstriping, too much more to list
Special thanks: All of his friends and family for putting up with his driven obsession
Completion date: ASAP